Printables · package 0.1.0
Print ALOHA
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 25
- Entries
- 11
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 25
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- PLA25 parts
Printer time: not stated. 25 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| handle_lower (master handle)printed.handle-lower | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| handle_upper (master handle)printed.handle-upper | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| lever1 (backdriving unit)printed.lever1 | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| lever2 (backdriving unit)printed.lever2 | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| slider (backdriving unit, rides on the gripper rail)printed.slider | FDMPLA | 4 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| rotor (backdriving unit)printed.rotor | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| rotor_arm (backdriving unit)printed.rotor-arm | FDMPLA | 4 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| finger1 (puppet gripper)printed.finger1 | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| finger2 (puppet gripper)printed.finger2 | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| cam_mount (wrist camera)printed.cam-mount | FDMPLA | 2 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
| cam_mount_2 (front camera)printed.cam-mount-2 | FDMPLA | 1 | — | — | source · drive.google.comprofile: Cura; PLA (ABS also works); supports on; infill |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.