Printables · package 0.1.0
Print ToddlerBot
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 13
- Entries
- 13
- Filament (stated)
- 1.52 kg
- Printer time
- 55 h
- Processes
- FDM · 13
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed≈ 8Mass rule of thumb: 200 g per plate at 256 mm, scaled by bed area.
By material
- PLA13 parts · 1,520 g
Printer time: 55 h.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Arm plate 1 (arms are identical left/right) (MakerWorld 2XC profile, plate 1)printed.arm-1 | FDMPLA-CF | 1 | 4.1 | 94 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill (MakerWorld pr |
| Arm plate 2 (MakerWorld 2XC profile, plate 2)printed.arm-2 | FDMPLA-CF | 1 | 4.1 | 94 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Left leg plate (MakerWorld 2XC profile, plate 3)printed.leg-left | FDMPLA-CF | 1 | 4.7 | 120 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Right leg plate (MakerWorld 2XC profile, plate 4)printed.leg-right | FDMPLA-CF | 1 | 4.7 | 120 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Torso plate (MakerWorld 2XC profile, plate 5)printed.torso | FDMPLA-CF | 1 | 10 | 312 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Torso + head + neck small parts (MakerWorld 2XC profile, plate 10)printed.torso-head-neck | FDMPLA-CF | 1 | 3.1 | 61 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Head cover (MakerWorld 2XC profile, plate 11)printed.head-cover | FDMPLA-CF | 1 | 3.9 | 70 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Waist (gears: tips page recommends PLA-CF with more wall loops) (MakerWorld 2XC profile, plate 13)printed.waist | FDMPLA-CF | 1 | 3.8 | 86 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Feet, rubber-pad version (alt: plate 15 'Foot without Rubber', 34 g, 1.1 h) (MakerWorld 2XC profile, plate 17)printed.foot | FDMPLA-CF | 1 | 1 | 27 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Palms, rubber-pad version (alt: plate 16 'Palm with TPU', 62 g TPU, 5.1 h) (MakerWorld 2XC profile, plate 18)printed.palm | FDMPLA-CF | 1 | 1.4 | 42 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Unlabelled plate (contents not named on MakerWorld) (MakerWorld 2XC profile, plate 19)printed.plate-19 | FDMPLA-CF + PLA (28 g + 3 g) | 1 | 1 | 31 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Zero-point calibration devices, set 1 (tooling) (MakerWorld 2XC profile, plate 8)printed.calibrator-1 | FDMPLA | 1 | 8.4 | 298 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
| Zero-point calibration devices, set 2 (tooling) (MakerWorld 2XC profile, plate 12)printed.calibrator-2 | FDMPLA | 1 | 4.4 | 165 | source · makerworld.comprofile: 0.2 mm layer, 6 walls, 25% infill |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: 1.52 kg of filament and about 55 h of printer time.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.
Hardware licence: CC-BY-NC-SA-4.0